The ACI/LP Series transmitters are a
low cost alternative to the ACI/DP Series pressure transmitter. The
LP Series is a 4-20mA transmitter, with uni-directional spans.
transmitters incorporate a piezoresistive, silicon micro machined
sensing element to enable very low pressure measurements.
Integrated temperature compensation with offset and span calibration
extends performance of these devices without a sacrifice in
are powered by a 24 to 36 VDC or 24 VAC supply. The electronics
provide a two-wire, linear 4-20mA current loop or an optional
voltage output. The uni-directional
spans range from
0-1” to 0-10” WC. Factory units are calibrated with a 4-20mA output
as standard. If voltage output units are required, they must be
ordered as such from the factory.
transmitters may be used in many different applications. They may
be used in static pressure applications such as pressure control in
rooms or leak detection. Another application is monitoring filter
blockage. In combination with a pitot tube or orifice plate, flow
can be measured and controlled in ducts. The pressure transmitter
uses a durable and proven technology to provide lengthy and stable
All ACI/LP Series
transmitters have a limited 2 year warranty.