CAL 9500 Temperature and Process Controller

Temperature Control Applications Notes
All West Controllers
All CAL Controllers

Ramp and Soak
Full PID Temperature and Process Controller

Features

9500P Programmable Process Controller

  • Full PID Autotuning Process Controller

  • Total of 3 outputs.   Choose from:
    4-20mA
    0-5v / 0-10v
    SSR drive
    Relay
  • Input options:
    Thermocouple
    2 or 3 wire PT100
    0-50mV, 0-5, 0-10V, 0-20mA, 4-20mA
  • Alarms with 5 options
  • PID heat-cool operation
  • Programmer operation
  • Sleeve mounting for easy maintenance
  • IP66 protection from front panel
  • CE, UL & CSA approvals
  • 3-year warranty
  • Charting and logging software option
  • RS232/485 Modbus option
Programmer Features
  • Up to 31 programs (profiles)
  • Up to 126 segments
  • Unlimited use of event outputs via the 2nd and 3rd outputs
  • Copy/paste/edit/delete functions to simplify program building
  • Call another program as a sub-program segment
  • Up to 999 program loop cycles, or continuous loop cycling
  • Hold back function to ensure the next segment is not started until the last segment reaches set-point
  • 3 power fail recovery options, (hold, continue or reset)
  • Front Panel Interrogation of the program position
  • Memory usage indication during programming
  • Front panel 'release from hold' function to run the program.

 

Options:
Inputs: Thermocouple/PT100, mV, 4-20mA, 0-20mA - Standard
Outputs(3): Outputs 1 & 2: (Select two)
SSR driver, relay, 4-20mA, 0-5V, 0-10V
Third output is always a relay
Communications: RS232, RS485 with MODBUS RTU protocol

Specifications - 9500P
Thermocouple RTD Linear Process Inputs *

9 types:

B,E,J,K,L,N,R,S,T  

RTD/PT100

2 & 3 wire

Options:

0 to 50mV +/-0.1%

Standards:

IPTS/68/ DIN 43710

Standards

DIN43760 (-200/400°C)

4-20mV/mA +/-0.1%

CJC rejection:

20:1 (0.05°/°C) typical

0-5V +/-0.1%

External resistance

100 ohms maximum

0-10V +/-0.1%

* Use 1 ohm external shunt for mA

Inputs:   (SM = sensor maximum)
Calibration accuracy: +/- 0.25% SM +/-1°C
Sampling frequency: input 10Hz, CJC 2 sec.
Common mode rejection: Negligible effect up to 140db, 240V, 50-60Hz
Series mode rejection: 60db, 50-60Hz
Temperature coefficient: 50ppm/°C SM typical
Reference conditions: 22°C +/- 2°C, rated voltage after 15 minutes settling time.
Outputs:  (3 Outputs)
SSd1 and SSd2 solid state relay driver: to switch a remote SSR 6VDC (nominal) 20mA non-isolated
Miniature power relay: form A/SPST contacts (AgCdO)
rLY1, rLY2, rLT3: 2A/250VAC resistive load
Analog output: 4-20mA 500 ohms max’ +/- 0.1% fs
0-5Vdc 10mA (500 ohms min’) +/- 0.1% fs
0-10Vdc 10mA (1K ohms min’) +/- 0.1% fs
Output 3: form A/SPST contacts (AgCdO) - 2A/250VAC resistive load
General:
Displays:      Upper, 4 digits, high brightness green LED 10.4mm (0.4") high.
Lower, 4 digits, high brightness orange LED 9mm (0.35") high.
Digital range –199 to 9999
Hi-res mode –199 to 999.9
LED output indicators – flashing SP1 square, green; SP2/SP3 round, red.
Keypad: 3 elastomeric buttons.
Power Supply: 100-240V AC, 50-60 Hz , (5.0 VA typ)
Environmental:
Humidity: Max’ 80%
Altitude: up to 2000M
Installation: categories II and III
Pollution: Degree II
Protection: NEMA 4X, IP66
EMC emission: EN50081-1 FCC rules 15 sub-part J class A 
EMC immunity: EN50082-2
Ambient temperature: 0-50°C (32-130°F)
Moldings: flame retardant polycarbonate
Weight: 180g (6.4 oz)
Dimensions:
Front fascia: 51.0 x 51.0mm (2.0" x 2.0") (includes gasket)
Sleeve length: 106.7mm (4.2") (with gasket fitted)
Instrument body: 44.8 x 44.8mm (1.76" x 1.76")
Overall length: 116.2mm (4.57")
 Cutout: 1/16 DIN - 45mm x 45mm (1.77" x 1.77")  - Punches
  Input Ranges:
 
TC Range
Type °C °F
0 to 1800 °C  32 to 3272 °F 
0 to 600 °C  32 to 1112 °F 
0 to 800 °C  32 to 1472 °F 
-50 to 1200 °C  -58 to 2192 °F 
0 to 800 °C  32 to 1472 °F 
-50 to 1200 °C -58 to 2192 °F 
0 to 1600 °C  32 to 2912 °F 
0 to 1600 °C  32 to 2912 °F 
-200 to 250 °C  -273 to 482 °F 
Sensor Range
Type °C °F
Pt  RTD 100 -200 to 400 °C -273 to 752 °F
   
Linear Inputs 0 - 20 mV/mA 4 - 20 mV/mA
Lin 1 0 - 100  
Lin 2   0 - 100
Lin 3 0 - 1000  
Lin 4   0 - 1000
Lin 5 0 - 2000  

Note1:  Use Level 3 Span and Zero for Linear Data In Engineering Units
Note2:  Use 1 ohm external shunt for mA inputs 

 

Typical Pricing:
9500 with SSD/Relay/Relay Output $ 294.00
9500 w/Relay, Relay Relay Output $ 307.00
9500 w/4-20mA/SSD/ Relay output $ 358.00
9500 w/4-20mA/SSD/ Relay output + comms $ 419.00

Comms Hook-up      Typical Hook-up      Users Manual       Temperature Control Applications Notes

I Would Like To:
Name:  
Company:
Address:
City, State, Zip:
Country:
Phone Number:
Fax Number:
E-Mail:  
Other Info:
 
Home Page      Site Index      Contact Us      Applications Notes and Tables      Products      Manuals      On Line Order

Note:  Prices shown are for reference only, and may change without notice.  Contact Advanced Industrial Systems, Inc. for firm price quotations.

Advanced Industrial Systems, Inc.
1-800-532-2477         Fax:  1-502-228-0127       Sales@AdvIndSys.com

American Express

Visa

Mastercard

Discover

Copyright 1997 - 2013 Advanced Industrial Systems, Inc. All rights reserved.
Last modified: Wednesday October 23, 2013.